Amada ENSIS-3015AJ

There are two models available in the ENSIS AJ series from Amada, the ENSIS-3015 and the ENSIS-4020, each coming in 2kw and 3kw.

This laser cutting machine has a working range of 3070x1550 mm and can handle a cutting speed of 0-120 meters per minute. Depending on the material quality, even if you select the 2000 W CNC machine, the fiber laser will cut through 25 mm thick steel.

Amada ENSIS-3015AJ

The lasering machine from the ENSIS AJ series has a shuttle table that can handle a maximum material length and width of 3050x1525mm respectively. The skid pitch of the shuttle table is 75 mm.

A special feature that the laser machine can boast is the ability to adjust the beam continuously to match the thickness of the material. This helps remove the finished sheet metal parts more easily.

SMP, CAD/CAM sheet metal software from Merry Mechanization, can work with any of the ENSIS AJ laser machines that you choose.

Machine Specifications

Laser Properties
Working range (X x Y): 3070 x 1550 mm
Oscillator: ENSIS 2000
Laser principle: Flying optic
Cutting speed: 0 - 120 m per minute
Shuttle Table Specifications
Maximum Material Length: 3,050 mm
Number of Pallets: 2 pieces
Maximum Material Mass: 920 kg
Maximum Material Width: 1,525 mm
Working Surface Height: 940 mm
Skid Pitch: 75 mm
Length: 10,136 mm
Height: 2,240 mm
Width: 2,840 mm
Weight: 12,100 kg

Specifications may vary. Manufacturers reserve the right to change the specs at any time without notice.